Although cable trays can be seen everywhere now and are used in more and more fields, we need to install them when we use them. Sometimes we will encounter different pipes when we install them. Because the performance of different pipes is different, when installing products, if we don't keep a certain distance between the products and the pipes, It will cause some damage to the product, so when we encounter pipelines during installation, we should keep a certain distance. What should be the distance between different pipelines?

1、電纜橋架與熱力管道平行架設，熱力管道有保溫層時不小于500mm，無保溫層時不小于1000mm。

1. The cable tray shall be erected in parallel with the thermal pipeline, and the thermal pipeline shall not be less than 500mm with thermal insulation layer and 1000mm without thermal insulation layer.

2、在進行安裝的時候不宜在輸送具有腐蝕性液體管道的下方或具有腐蝕性氣體管道上方平行安裝。當無法避免時，應不小于500mm。且其間應用防腐隔板隔開。

2. During the installation, it is not suitable to install in parallel below the pipeline conveying corrosive liquid or above the pipeline conveying corrosive gas. When it cannot be avoided, it shall not be less than 500mm. And they should be separated by anti-corrosion partition.

3、電纜橋架不宜在熱力管道的上方平行安裝，當無法避免需在熱力管道上方平行安裝時，應不小于1000mm，其間應采取有效的隔熱措施。

3. The cable tray should not be installed in parallel above the heat pipe. When it is unavoidable to install in parallel above the heat pipe, it should not be less than 1000mm, and effective heat insulation measures should be taken.

4、產品與一般工藝管道(如壓縮空氣管道等)平行架設時不小于400mm。

4. When the product is erected in parallel with the general process pipeline (such as compressed air pipeline), it shall not be less than 400mm.
              

5、電纜橋架與具有腐蝕性液體管道平行架設時不小于500mm。

5. When the cable tray is erected in parallel with the corrosive liquid pipeline, it shall not be less than 500mm.

為了在進行安裝電纜橋架的時候不會因為一些錯誤的距離導致產品遭受腐蝕或者損壞，在進行安裝產品的時候碰到管道的時候，可以首先判斷管道的性質，然后在根據以上的距離進行安裝，做好相應的保護措施。為了以后更好的使用，在使用過程中要定期的對產品進行維護保養，以防在使用過程中發生問題。

In order to prevent the product from corrosion or damage due to some wrong distance when installing the cable tray, when installing the product and touching the pipeline, you can first judge the nature of the pipeline, and then install according to the above distance, and take corresponding protective measures. In order to better use in the future, the product should be maintained regularly in the process of use, in order to prevent problems in the process of use.

感謝您的閱讀，希望以上內容能對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：濟南電纜橋架http://www.ymmgjx.net。

Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Jinan cable bridge http://www.ymmgjx.net .