電纜橋架主要是起到支撐和保護電纜的作用，如今在我們身邊經常能見到它的安裝作業，當然不同電纜橋架有不同的安裝特點，下面來講講吧。

　　Cable tray mainly plays the role of supporting and protecting the cable. Now we often see its installation around us. Of course, different cable tray has different installation characteristics.

　　螺桿吊設橋架時，未按規范要求設置防晃托架，鋼托架未按規范要求安裝防晃托架。

　　When the screw suspension is installed, the anti-sway bracket is not set according to the code requirements, and the steel bracket is not installed according to the code requirements.

　　接地跨接線在橋架兩側隨意設置或漏設，接地跨接線不設在顯眼側。交叉接地線的線鼻與爪形墊片壓接依次裝反，有些沒有爪形墊片，鍍鋅橋架的接地螺栓沒有防松墊。

　　The grounding jumper is randomly set or missed on both sides of the bridge, and the grounding jumper is not set on the conspicuous side. The nose of the cross ground wire and the claw gasket are crimped in turn. Some of them have no claw gasket. The ground bolt of the galvanized bridge does not have loose gasket.

　　吊頂內托盤、槽式橋架蓋板漏雨。橋架接板固定螺栓的螺母安裝在橋架接板的內側，橋架接板與配電箱、柜體、接地管等未作接地面連接。

　　The tray inside the suspended ceiling and the trough bridge cover plate leak. The nut of the fixing bolt of the bridge connecting plate is installed on the inside of the bridge connecting plate. The bridge connecting plate is not connected to the ground with the distribution box, cabinet body, grounding pipe, etc.

　　電纜橋架和支架之間沒有固定，橋架支架沒有作接地跨接，穿越防火分區沒有作防火阻隔。

　　There is no fixed between the cable bridge and the bracket, the bridge bracket is not connected by ground, and there is no fire barrier through the fire partition.

　　鋁合金橋架與鋼橋架之間不作防電化風剝雨蝕絕緣處理。耐火電纜橋架彎頭、三通等不使用與橋架配套的零部件，而是現場加工制作而成，加工制作的顏色不符合規范要求，因此，不能滿足要求。

　　Aluminum alloy bridge and steel bridge are not made between the electrical wind erosion insulation treatment. The elbow and tee of the fire-resistant cable bridge do not use the parts matching the bridge, but are made by on-site processing. The color of the processing does not meet the requirements of the specification, so it cannot meet the requirements.

　　五金電纜橋架及其支架全長未作可靠接地，未按規范要求安裝伸縮接頭。

　　The full length of hardware cable tray and its support is not reliably grounded, and expansion joints are not installed according to the specification requirements.

　　此外，濟南電纜橋架廠家提醒您，電纜橋架的安裝時間非但沒有提到橋架安放時還需要考慮電纜的走向和細節處理問題，這方面也要多加去注意去了解才行。

　　In addition, Ji 'nan cable bridge manufacturers remind you that the installation time of cable bridge not only did not mention the installation of the bridge but also need to consider the direction and details of the cable, which should also pay more attention to understand.

　　相信通過本文的介紹，您能對電纜橋架有一定的了解和認識，以上內容希望對您有所幫助。此外，如果您想了解更多的相關信息，可以關注我們網站www.ymmgjx.net。

　　I believe that through the introduction of this article, you can have a certain understanding and understanding of cable bridge, the above contents hope to help you. In addition, if you want to know more about related information, you can follow our website www.ymmgjx.net.